• The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING


  • The heart of HPDC process

    The design of the diecasting tool bases itself on the customer’s requirements as regards volumes, cycle time and resources available for the project.  In this phase the filling and solidification simulation with Magma multicore software, available at Saen since 1998, enables the optimization of the feeding of the part, the position and number of the venting elements, the areas to thermoregulate and/or cool down even with the use of jet coolings and the areas where the volumetric shrinkage needs to be compensated with squeezing pins. The production phase takes advantage of a big machinery inventory, of which 33 milling machines, a pallet-change automated system, a lean-concept based organization and high-specialized technical staff. The whole production is monitored by a planning system, which guarantees punctuality of deliveries. From prototype tools up to tools for machines up to 2000 ton closing force we can offer a product aligned with the most modern technologies available on the market.

    1. TOOLS FOR MACHINES UP TO 2000 TONS
    2. 33 MACHINING UNITS – 20 WITH PALLET CHANGE
    3. LEAN PRODUCTION AND PROCESS MONITORING